Rose electronics VSP-2DVI Especificaciones descargar pdf (Pagina 142)

142

NLUO PMC CONTRACTOR

SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL

factor.

18. VOLTAGE: 380/400/415VAC, 3phase+N+PE

19. Regulation: +/-1% for 100% unbalanced load

20 FREQUENCY: 50Hz +/-0.05 % in free running

mode

21. WAVE FROM: True sine wave

22. THD:<=3% for 100% liner load

23. DYNMIC RESPONSE: For 0-100% step load

changed the output shall remain within +/- 5% &

recovery to 100% within 0 sec.

24. CREST FACTOR: 3:1 at 100% non-liner load

25. OVERLOAD CAPACITY: 125% For 10minutes,

150% for 1 minute.

26. Output of UPS should be 1 phases 4wired un

balance type.

BYPASS STATIC SWITCH

27. AUTO TRANSFER AND RETRANSFER: Load

transfer to bypass in cases of fault is cleared. The

transfers automatically once the fault is cleared.

The transfer and retransfer takes place in <5

milisec, in sync mode and < 20milisec, in a sync

mode.

28. STATIC SWITCH RATING: 14 Times rated

current for 10 milisec, 10 times rated for 100

milisec.

29. MAINTENANCE BY PASS SWITCH: 100%

rated make before type switch should be used.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 194 195

Sin comentarios

Rose electronics VSP-2DVI Especificaciones Pagina 142