Rose electronics UltraMatrix 8 Manual de instrucciones descargar pdf (Pagina 11)

ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL

Switching using serial commands

Set-up a serial communication program with the following parameters:

Baud Rate – 9600

Data Bits – 8

Parity – None

Stop Bits - 1

Connect to the UltraMatrix AV DVI 8x8 unit and issue the following

command : <CR>//MxxIyy<CR>

where xx = output port / yy = input port / <CR> = carriage return

To switch monitor #2 to computer #4, issue the command

To display a computer on all monitors use 00 as the output port.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Sin comentarios

Rose electronics UltraMatrix 8 Manual de instrucciones Pagina 11