INTRODUCTION
UltraMatrix AV Installation and Operations Manual
1
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufacturer assumes no responsibility for
errors or omissions. Neither does the manufacturer assume any liability for damages resulting from the use of the
information contained herein. The manufacturer reserves the right to change the specifications, functions, or circuitry of
the product at any time without notice.
The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances outside the
manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury arising directly or
indirectly from the use of this product.
(See limited warranty)
Introduction
Thank you for choosing Rose Electronics
®
UltraMatrix AV™ for your audio and VGA video switching requirements. The
UltraMatrix AV is designed especially for control rooms, audio/video presentations, security centers and many other
digital media applications.
The ease of switching audio and video sources makes the UltraMatrix AV a versatile and flexible addition to your
system. Up to 16 video sources and 16 audio sources can be switched to any selected output port. The audio can be
automatically switched with the video source or the audio can be switched independently of the video. This is ideal for
routing one sound track to several video clips. The video and audio switching can be controlled by an IR controller, the
RS232 input using a PC Windows based software or individually controlled at the remote location.
The UltraMatrix AV supports resolutions up to 1600 x 1200 (bandwidth – 200 MHz) for high quality imagery and video
and full stereo audio with a frequency response of 20Hz to 20 KHz.
Repetitive switching sequences can be recorded and saved in 1 of 50 macros for playback at any time.
Installation consists of two procedures:
1. Connecting the equipment
a. Computer videos
b. Audio sources
2. Installing the access software for controlling the UltraMatrix AV.
Each computer’s video is connected using a HD15M to HD15M cable
Each computer’s audio is connected using a standard 3.5mm stereo audio cable
The access software makes switching the selected input to an output fast and easy. Just click on the input source and
then the output destination and the video and audio is instantly switched. By default, the video and audio from a selected
input source are switched together to the output destination. The audio can be configured to switch independently from
the video allowing you to distribute the audio to several output destinations.
Features
Switch multiple video and audio signals to multiple monitors and stereo speakers
Route stereo audio together with the video signal to multiple outputs
Supports all video formats
(VGA / SVGA / XGA / RGBHV / SOG and others)
Video bandwidth of 200MHz
Supports resolutions up to 1600 x 1200
Save and playback up to 50 different Macro routing sequences
Click and switch intuitive software for audio and video switching
Add additional units to increase the number of monitors (up to 64) that can be switched to
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales