Rose electronics Translator Manual de instrucciones descargar pdf (Pagina 24)

SERVEVIEW PRO INSTALLATION AND OPERATIONS MANUAL

PS/2 mouse gets out of sync

¾ Cabling was disturbed during mouse movement. Issue the null

command once or twice to re-sync the mouse. Update mouse driver.

Try using ctrl O command to recover if O/S is NT.

¾ Sun keyboard needs to be reset, with unit power on, disconnect and re-

connect the sun keyboard.

Video fuzzy

¾ Cable too long or wrong type. Verify that resolution and distance

match. See Appendix G. Upgrade cable if necessary.

Video not synchronized or wrong color

¾ Cable is loose, reseat cable.

¾ Monitor not capable of syncing to video selected, upgrade monitor.

¾ Cable is defective; try using cable from another computer if problem

goes away cable is defective.

¾ Port on ServeView Pro is defective; try using another port on

ServeView Pro. If problem goes away port is defective.

Lower resolution OK, but can’t enter high resolution mode

¾ Video driver has not been setup for this resolution. Configure the

driver.

Slave unit does not switch

¾ Maximum ports command not issued.

¾ Width or units command not configured properly. Reconfigure them to

match number of computers and how they are connected.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Sin comentarios

Rose electronics Translator Manual de instrucciones Pagina 24